FixVault
Home › Pontiac › 2007 › Vibe Automatic › Repair and Diagnosis › Body & Frame › Mirrors › Mirror System › Repair Instructions › Power Mirror Replacement › Removal Procedure

Removal Procedure

    Fig 1: Power Mirror Components
    GM846409Courtesy of GENERAL MOTORS CORP.
  1. Unclip and remove the inner mirror garnish (6) from the door.
  2. Remove the front side door trim. Refer to Front Side Door Trim Panel Replacement .
  3. Disconnect the front upper speaker electrical connector (5), if equipped.
  4. Disconnect the outside rearview mirror electrical connector (2).
  5. Remove the following components from the door:
    • The 3 nuts
    • The front upper speaker (3), if equipped.
    • The outside rearview mirror (1)
About FixVault