Installation Procedure

Fig 1: Window Guide Channel, Bolts And Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the window guide channel (1) to the rear door. Secure the guide channel with the 2 bolts (2) and the 2 screws (3).
Tighten: Tighten the window guide channel bolts to 6.2 N.m (55 lb in).
Install the rubber window run channel into the center guide channel.
Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
Install the rear side door trim. Refer to Rear Side Door Trim Panel Replacement .