FixVault
Home › Pontiac › 2007 › Vibe Automatic › Repair and Diagnosis › Electrical › Body Electrical › Accessory Power Socket › Repair Instructions › AC/DC Power Outlet Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: AC/DC Power Outlet Control Module & Bolts
    GM852193Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Move the driver seat to the full rearward position.
  3. Remove the 2 bolts (1).
  4. Fold the floor carpet to the inside.
  5. Disconnect the electrical connector (2).
  6. Remove the accessory AC/DC power control module (3) from the vehicle.
About FixVault