FixVault
Home › Pontiac › 2007 › Vibe Standard › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Cellular System, Entertainment System, And Navigation System › Repair Instructions › OnStar Vehicle Interface Unit Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Communication Interface Module
    GM1529444Courtesy of GENERAL MOTORS CORP.
  1. Position the vehicle interface unit module.
    2. NOTE: Refer to Fastener Notice .
  2. Install interface unit module retaining nut (2).

    Tighten:  Tighten the power control module bolts to 7 N.m (62 lb in).

  3. Connect the vehicle interface unit module electrical connector (1).
  4. Install the communication interface module. Refer to Communication Interface Module Replacement .
About FixVault