FixVault
Home › Pontiac › 2007 › Wave Base, 4D Hatchback, D16/MLM › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) › Repair InstructionsEngine Control Module Replacement › Manifold Absolute Pressure Sensor ReplacementRemoval Procedure › Removal ProcedureInstallation Procedure

Removal ProcedureInstallation Procedure

    Fig 1: View Of Manifold Absolute Pressure Sensor
    GM1348510Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the manifold absolute pressure (MAP) sensor electrical connector.
  3. Remove the MAP sensor bolt.
  4. Remove the MAP sensor.
About FixVault