FixVault
Home › Pontiac › 2008 › G8 Base › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Splash Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Engine Splash Shield To Front Subframe Retaining Screws
    GM1936964Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield (2) to the front subframe.
    2. NOTE: Refer to Fastener Notice .
  2. Install the engine splash shield to front subframe retaining screws (1).

    Tighten:  Tighten the screws to 9 N.m (80 lb in).

  3. Lower the vehicle.
About FixVault