FixVault
Home › Pontiac › 2008 › G8 Base › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Rear Wheel Speed Sensor Wiring Harness Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Wheel Speed Sensor Jumper Harness Electrical Connector & Right Hand Rail
    GM1943714Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution .
    CAUTION: Refer to Vehicle Lifting Caution .
    CAUTION: Refer to Brake Dust Caution .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear wheels. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the wheel speed sensor jumper harness electrical connector (1).
  4. Detach the electrical connector (1) from the right hand rail (2).
    5. Fig 2: Identifying Left Rear & Right Rear Wheel Speed Sensor Electrical Connectors
    GM1939426Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the left rear and right rear wheel speed sensor electrical connectors (1).
  6. Detach the wheel speed sensor wiring harness mounting clip (2) from the left rear and right rear knuckles (3).
    7. Fig 3: Identifying Wheel Speed Sensor Wiring Harness Mounting Clip
    GM1943685Courtesy of GENERAL MOTORS CORP.
  7. Detach the wheel speed sensor wiring harness mounting clip (1).
    8. Fig 4: Identifying Wheel Speed Sensor Wiring Harness Mounting Clips & Rear Suspension Subframe
    GM1943683Courtesy of GENERAL MOTORS CORP.
  8. Detach the wheel speed sensor wiring harness mounting clips (1) from the rear suspension subframe (2).
    9. IMPORTANT: Note the routing of the wheel speed sensor jumper harness (3).
  9. Remove the wheel speed sensor jumper harness (2) from the vehicle.
About FixVault