FixVault
Home › Pontiac › 2008 › G8 Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Engine Ground Strap Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Ground Strap To Chassis Retaining Bolt
    GM2049445Courtesy of GENERAL MOTORS CORP.
  1. Install the ground strap (1) to the engine compartment.
    2. NOTE: Refer to Fastener Notice .
  2. Install the ground strap to engine block retaining bolt (2).

    Tighten:  Tighten the bolt to 50 N.m (37 lb ft).

  3. Install the ground strap to chassis retaining bolt (3).

    Tighten:  Tighten the bolt to xx N.m (xx lb ft).

  4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault