FixVault
Home › Pontiac › 2008 › G8 Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Bracket Replacement (3.6L Engine) › Installation Procedure

Installation Procedure

    Fig 1: Identifying Alternator Mounting Bracket To Cylinder Block Retaining Bolts
    GM1958079Courtesy of GENERAL MOTORS CORP.
  1. Install the alternator bracket (2) to the engine block.
    2. NOTE: Refer to Fastener Notice .
  2. Install the alternator bracket to engine block retaining bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the coolant inlet pipe to alternator mounting bracket retaining nut (3).

    Tighten:  Tighten the bolts to 22 N.m (16 lb ft).

About FixVault