FixVault
Home › Pontiac › 2008 › G8 GT › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Wheel Speed Sensor Jumper Harness Electrical Connector
    GM1943660Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Safety Glasses Caution .
    CAUTION: Refer to Vehicle Lifting Caution .
    CAUTION: Refer to Brake Dust Caution .
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear wheels. Refer to Tire and Wheel Removal and Installation .
  3. Disconnect the wheel speed sensor electrical connector (1).
    4. Fig 2: Identifying Wheel Speed Sensor
    GM1943659Courtesy of GENERAL MOTORS CORP.
  4. Remove the wheel speed sensor to knuckle retaining bolt (3).
  5. Remove the wheel speed sensor (2) from the knuckle (1).
About FixVault