| Accelerator Pedal Position (APP) Sensor Assembly Retaining Bolts |
20 N.m |
15 lb ft |
| Air Cleaner Lower Housing Retaining Bolts |
10 N.m |
89 lb in |
| Camshaft Position (CMP) Sensor Retaining Bolt |
25 N.m |
18 lb ft |
| Crankshaft Position (CKP) Sensor Retaining Bolt |
25 N.m |
18 lb ft |
| Engine Coolant Temperature (ECT) Sensor |
20 N.m |
15 lb ft |
| Evaporative Emissions (EVAP) Canister Retaining Bolts |
6 N.m |
53 lb in |
| Fuel Filler Hose Clamps |
4 N.m |
35 lb in |
| Fuel Pipe Stone Guard Retaining Nuts |
5 N.m |
44 lb in |
| Fuel Rail Retaining Bolts |
10 N.m |
89 lb in |
| Fuel Tank Strap Upper Retaining Bolts |
20 N.m |
15 lb ft |
| Heated Oxygen Sensor (HO2S) |
41 N.m |
30 lb ft |
| Ignition Coil to Ignition Plate Assembly Retaining Bolts |
12 N.m |
106 lb in |
| Knock Sensor (KS) Retaining Bolt |
20 N.m |
15 lb ft |
| Spark Plug |
15 N.m |
11 lb ft |
| Throttle Body Retaining Bolts |
12 N.m |
106 lb in |
| Fuel Rail Ground Strap To Intake Manifold Retaining Bolts |
10 N.m |
89 lb in |
| Air Cleaner Intake Duct to Throttle Body Retaining Clamp |
4 N.m |
35 lb in |
| Ignition Coil To Rocker Cover Retaining Blots |
12 N.m |
106 lb in |
| Fuel Filler Pipe to Chassis Retaining Bolts |
9 N.m |
80 lb in |
| Rear Subframe to Chassis Retaining Bolts |
| First Pass: |
65 N.m |
48 lb ft |
| Final Pass: |
125 Degrees |
| Intake Air Temperature/Mass Air Flow (AT/ MAF) to Air Intake Duct Retaining Clamp |
2 N.m |
18 lb in |
| Intake Air Temperature/Mass Air Flow (AT/ MAF) to Upper Air Cleaner Body Retaining Clamp |
2 N.m |
18 lb in |