FixVault

Installation Procedure

    Fig 1: Sunroof Module & Components
    GM317129Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof module to the vehicle roof with an assistant.
  2. NOTE: Refer to Fastener Notice .
  3. Install the sunroof module bolts.

    Tighten:  Tighten the sunroof module bolts to 10 N.m (89 lb in).

  4. Fig 2: Sunroof Module Drain Hoses
    GM791513Courtesy of GENERAL MOTORS CORP.
  5. Connect the front and rear drain hoses to the sunroof module.
  6. Install the sunroof motor. Refer to Sunroof Motor/Actuator Replacement .
  7. Fig 3: View Of Sunroof Module Electrical Connector
    GM647217Courtesy of GENERAL MOTORS CORP.
  8. Connect the electrical connector to the sunroof module.
  9. Install the sunshade panel. Refer to Sunroof Sunshade Replacement .
  10. Install the sunroof window. Refer to Sunroof Window Replacement .
  11. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (New Motor)  or Sunroof Motor/Actuator Initialization/Teach Process (Existing Motor) .
  12. Inspect for proper operation of the sunroof. Refer to Sunroof Description and Operation (One Connector System) .
  13. Install the headliner. Refer to Headlining Trim Panel Replacement .
  14. Install the rear window trim panel. Refer to Rear Window Shelf Trim Panel Replacement .