FixVault
Home › Pontiac › 2008 › Grand Prix Base › Repair and Diagnosis › Body & Frame › Door Locks › Power Door Lock System And Release Systems › Repair Instructions › Handle Lock Rod Guide Block Replacement › Removal Procedure

Removal Procedure

    Fig 1: Retaining Guide Block & Handle Lock Rod
    GM794020Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: This procedure covers the removal and installation of the front and the rear door.
  1. Remove the front or rear door trim panel Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
  2. Pull the rod (2) upward until it releases from the lock rod guide block (1).
  3. Remove the lock rod guide block (1) from the door.
About FixVault