FixVault
Home › Pontiac › 2008 › Grand Prix Base › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Splash Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Engine Splash Shield
    GM753416Courtesy of GENERAL MOTORS CORP.
  1. Align the holes in the engine splash shield to the holes in the outboard side engine compartment side rail.
  2. Install the push-in retainers to the engine splash shield.
  3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
About FixVault