FixVault
Home › Pontiac › 2008 › Grand Prix Base › Repair and Diagnosis › Body & Frame › Seats › Power Seat System › Repair Instructions › Lumbar Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Lumbar Control Switch & Trim Panel Retainer
    GM1230634Courtesy of GENERAL MOTORS CORP.
  1. Position the lumbar control switch to the seat.
  2. Connect the electrical connector to the lumbar switch.
  3. Press the switch into the retainer on the trim panel.
  4. Install the trim panel. Refer to Front Seat Trim Panel Replacement .
About FixVault