FixVault
Home › Pontiac › 2008 › Grand Prix Base › Repair and Diagnosis › Brakes › Anti-Lock Brake System, Traction Control System & Stability Control System › Diagnostic Information and Procedures › DTC C0236 › Repair Verification

Repair Verification

  1. Verify all connectors are reconnected.
  2. With the scan tool, clear the DTC.
  3. Disconnect the scan tool from the data link connector (DLC).
  4. Engine ON, test for DTC C0236 to reset.
    • If the DTC or DTCs is set, program the EBCM refer to Control Module References . If the DTC or DTCs resets, replace the EBCM.
About FixVault