FixVault
Home › Pontiac › 2008 › Grand Prix Base › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.8L - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating MAP & BARO Sensors
    GM1210599Courtesy of GENERAL MOTORS CORP.
  1. Install the BARO sensor.
  2. Install the BARO sensor retainer.
  3. Connect the BARO sensor electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
About FixVault