Installation Procedure
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the outside rearview mirror (1) to the door and the front upper speaker (3), if equipped. Secure the mirror with the 3 nuts.
Tighten: Tighten the outside rearview mirror nuts to 8 N.m (6 lb ft).
- Connect the front upper speaker electrical connector (5), if equipped.
- Connect the outside rearview mirror electrical connector (2).
- Install the inner mirror garnish (6) to the door.
- Install the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
NOTE:
Refer to FASTENER NOTICE
.