Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Remove the LH front seat. Refer to Front Seat Replacement - Bucket .

Fig 1: Deceleration Sensor Bracket And Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the bolt (1) and the yaw rate sensor bracket (2).
Disconnect the yaw rate sensor electrical connector.

Fig 2: Deceleration Sensor And Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the 2 bolts (1) that retain the yaw rate sensor (2).
Remove the yaw rate sensor (2) from the vehicle.