FixVault
Home › Pontiac › 2008 › Solstice Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Knock Sensor Replacement › Installation Procedure

Installation Procedure

IMPORTANT: Rotate the pigtail 90 degrees from vertical before securing the fastener.
    Fig 1: Identifying Knock Sensor & Bolt
    GM1578476Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the KS.
  2. Install the KS bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Locating KS Electrical Connector
    GM1590505Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the KS electrical connector (3).
  4. Install the KS electrical connector clip to the oil level indicator tube bracket.
About FixVault