Fuel Pump Flow Control Module Replacement
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Fuel Pump Flow Control Module Bolt (Qty: 3)
NOTE:
Refer to Fastener Notice
. Procedure: Disconnect the electrical connector. Tip: The bolts used are two headed and can be loosened from either side. Tighten: 9 N.m (80 lb in) |
| 2 | Fuel Pump Flow Control Module Procedure: If replacing the fuel pump flow control module, program the control module. Refer to Control Module References . |