FixVault
Home › Pontiac › 2008 › Vibe Automatic › Repair and Diagnosis › External Pages › Different car › Section 249 (HVAC System - Manual) › Repair Instructions › Recirculation Actuator Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Air Inlet Actuator Screws
    GM2015264Courtesy of GENERAL MOTORS CORP.
  1. Install the two screws (2) and the air inlet actuator (1) to the blower case.
  2. Connect the connector.
  3. Install the blower case assembly. Refer to Blower Case Assembly Replacement .
About FixVault