FixVault
Home › Pontiac › 2008 › Vibe Automatic › Repair and Diagnosis › External Pages › Different car › Section 296 (Keyless Entry System And Remote Functions) › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Bolt And Transponder Key ECU
    GM2032138Courtesy of GENERAL MOTORS CORP.
  1. Install the transponder key ECU with the bolt.
  2. Engage the clamp.
  3. Connect the connector.
  4. Install the HVAC module. Refer to HVAC Module Assembly Replacement .
About FixVault