FixVault
Home › Pontiac › 2008 › Vibe Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Shift Interlock System › Repair Instructions › Shift Lock Control Solenoid Replacement › Installation Procedure

Installation Procedure

    Fig 1: Electrical Connector And Retaining Screw
    GM882531Courtesy of GENERAL MOTORS CORP.
  1. Install the shift lock control module/shift lock solenoid assembly, then the retaining screw (2).
  2. Connect the electrical connector (1).
  3. Install the front floor console. Refer to Front Floor Console Replacement .
  4. Connect the negative battery cable.
About FixVault