FixVault
Home › Pontiac › 2008 › Vibe Standard › Repair and Diagnosis › External Pages › Different car › Section 245 (Lighting Systems) › Repair Instructions › Daytime Running Lights (DRL) Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The DRL control module is located behind the instrument panel storage compartment.
    Fig 1: Identifying Daytime Running Lights (DRL) Control Module Components
    GM2009643Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel accessory trim panel. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .
  2. Disconnect the DRL control module electrical connector (2).
  3. Remove the screw (3) which secures the DRL mounting bracket to the instrument panel.
  4. Remove the DRL control module (1) with bracket from the instrument panel.
About FixVault