FixVault
Home › Pontiac › 2009 › G3 Automatic › Repair and Diagnosis (Single Page) › Engine Performance › System › Engine Controls And Fuel - 1.6L (LXV) › Repair Instructions › Intake Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: IAT
    GM2049251Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor.
  2. Connect the IAT sensor connector (1).
  3. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault