FixVault
Home › Pontiac › 2009 › G3 Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.6L (LXV) › Repair Instructions › Accelerator Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

    WARNING: Refer to Battery Disconnect Warning .
    Fig 1: 3 Accelerator Pedal Retaining Nuts
    GM1670940Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the accelerator pedal position sensor connector.
  3. Remove the 3 accelerator pedal retaining nuts (1).
  4. Remove the accelerator pedal (2).
About FixVault