FixVault
Home › Pontiac › 2009 › G3 Automatic › Repair and Diagnosis › External Pages › Different car › Section 109 (Lighting System) › Repair Instructions › Daytime Running Lamp Control Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Daytime Running Lap Module and Bolts
    GM1248415Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the daytime running lamp module with the bolts and tighten to 2.5 N.m (22 lb in).
  2. Connect the electrical connector.
  3. Install the instrument panel lower cover.
  4. Connect the negative battery cable.
About FixVault