FixVault
Home › Pontiac › 2009 › G3 Automatic › Repair and Diagnosis › External Pages › Different car › Section 45 (Lighting System) › Repair Instructions › Daytime Running Lamp Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Daytime Running Lamp Module & Bolts
    GM1248415Courtesy of GENERAL MOTORS CORP.
    WARNING: Refer to Battery Disconnect Warning .
  1. Disconnect the negative battery cable.
  2. Remove the instrument panel lower cover.
  3. Reach underneath the instrument panel and remove the bolts and the daytime running lamp module.
  4. Disconnect the electrical connector.
About FixVault