FixVault

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Front Air Bag Sensor & Connector
    GM1786225Courtesy of GENERAL MOTORS CORP.
  1. Install the front air bag sensor.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the front air bag sensor mounting bolt (2).

    Tighten:  Tighten the side air bag sensor mounting bolts to 10 N.m (89 lb in).

  4. Connect the connector (1) to the front air bag sensor (3).
  5. On hatchback vehicles, install the headlamp assembly. Refer to Headlamp Replacement (Notchback) or Headlamp Replacement (Hatchback) .
  6. Connect the negative battery cable.