FixVault

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Passenger Air Bag Module & Mounting Bolts
    GM1252035Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the passenger air bag module by installing the mounting bolts to the air bag bracket and tightening to 11 N.m (97 lb in).
  2. Connect the passenger air bag yellow electrical connector.
  3. Install the glove box. Refer to Instrument Panel Storage Compartment Replacement .
  4. Connect the negative battery cable.