FixVault
Home › Pontiac › 2009 › G3 Standard › Repair and Diagnosis › External Pages › Different car › Section 32 (Supplemental Inflatable Restraint System) › Repair Instructions › Instrument Panel Inflatable Restraint Module Replacement (Notchback) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the passenger air bag module.
    2. Fig 1: Air Bag Module Mounting Bolts
    GM1724866Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the passenger air bag module mounting bolts to the tie bar and tighten to 15 N.m (11 lb ft).
    3. Fig 2: Passenger Air Bag Module & Mounting Bolts
    GM1724868Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the passenger air bag module mounting bolts to the upper instrument panel and tighten to 6 N.m (53 lb in).
  4. Install the instrument panel. Refer to Instrument Panel Assembly Replacement (Notchback) .
    5. Fig 3: Passenger Air Bag Yellow Electrical Connector
    GM1724863Courtesy of GENERAL MOTORS CORP.
  5. Connect the passenger air bag yellow electrical connector (1).
  6. Install the glove box. Refer to Instrument Panel Storage Compartment Replacement .
  7. Connect the negative battery cable.
About FixVault