FixVault
Home › Pontiac › 2009 › G5 Base, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.2L - Introduction › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of MAF/IAT Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  1. Remove the throttle body. Refer to Throttle Body Assembly Replacement .
  2. Disconnect the engine harness electrical connector from the manifold absolute pressure (MAP) sensor.
  3. Remove the MAP sensor and seal.
About FixVault