FixVault
Home › Pontiac › 2009 › G5 Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Shift Lock Control System › Diagnostic Information and Procedures › Transmission Control Lever Malfunction › Component Testing

Component Testing

  1. Install a 10A fused jumper wire between the control circuit terminal A and 12 volts. Install a jumper wire between the transmission shift select switch (park) signal circuit terminal B and ground.
  2. Listen for the solenoid to turn ON and OFF.
    • If the function does not perform as specified, replace the shift lock actuator.
About FixVault