FixVault
Home › Pontiac › 2009 › G6 GT, 2D Convertible, 3.5 K › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.5L - Introduction › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying MAP Sensor And MAP Sensor Seal
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor and MAP sensor seal into the upper intake manifold.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the MAP sensor attaching screw.

    Tighten:  Tighten the attaching screw to 6.5 N.m (57 lb in).

  3. Connect the MAP sensor electrical connector.
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
About FixVault