FixVault
Home › Pontiac › 2009 › G6 GXP, 2D Coupe › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.6L - Introduction › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the ECT sensor and tighten to 22 N.m (16 lb ft).
    2. Fig 2: Identifying ECT & HO2S Wiring Harness Connectors
    GM1838989Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (1) to the ECT sensor.
About FixVault