FixVault
Home › Pontiac › 2009 › G6 GXP, 2D Coupe › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.6L - Introduction › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying ECT & HO2S Wiring Harness Connectors
    GM1838989Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector (1) from the engine coolant temperature (ECT) sensor.
    2. Fig 2: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
  2. Remove the ECT sensor.
About FixVault