FixVault
Home › Pontiac › 2009 › G8 Base › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Fuel Tank Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Tank Heat Shield To Fuel Tank Retaining Nuts
    GM1947049Courtesy of GENERAL MOTORS CORP.
  1. Position the fuel tank heat shield (2) to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the fuel tank heat shield to fuel tank retaining nuts (1) and tighten to 4 N.m (35 lb in).
  3. Lower the vehicle to the ground.
About FixVault