FixVault
Home › Pontiac › 2009 › G8 Base › Repair and Diagnosis › Engine Performance › System › Engine Control System & Fuel System - 3.6L - Introduction › Repair Instructions › Ignition Coil Replacement - Bank 1 › Removal Procedure

Removal Procedure

    WARNING: Refer to Safety Glasses Warning .
  1. Turn the ignition OFF.
  2. Remove the engine cover. Refer to Engine Cover Replacement .
  3. Remove the upper intake manifold. Refer to Upper Intake Manifold Replacement .
    4. Fig 1: Identifying Ignition Coil To Camshaft Cover Retaining Bolts
    GM1949892Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil harness connector from the ignition coil.
  5. Remove the ignition coil to camshaft cover retaining bolts (1).
  6. Remove the ignition coils (2) from the vehicle.
About FixVault