Removal Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying VCIM Fascia Cover & Retaining Clips

Courtesy of GENERAL MOTORS CORP.

Unclip the VCIM fascia cover (1) at the retaining clips (2) and remove the VCIM fascia cover (1) from the vehicle.

Fig 2: Identifying Antenna Connectors, Wiring Harness Connectors & VCIM

Courtesy of GENERAL MOTORS CORP.

Disconnect the antenna connectors (1) and the harness connectors (2) from the VCIM (3).

Fig 3: Identifying VCIM, Supporting Bracket & Retaining Clip

Courtesy of GENERAL MOTORS CORP.

Remove the VCIM (3) by pressing up on the retaining clip (2) and sliding the VCIM (3) out of the supporting bracket (1).