Installation Procedure - Tweeter

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Tweeter Speaker To I/P Attaching Screw

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (3).

NOTE: Refer to Fastener Notice .

Install the tweeter speaker to I/P attaching screw (2).
Tighten: Tighten the screw to 2 N.m (18 lb in).
Install the left instrument panel defroster grille. Refer to Defroster Grille Replacement (LWB) .