Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Wiper Motor Module to Bulk Head Retaining Bolts | 8 N.m | 71 lb in |
| Wiper Arm to Pivot Stud Retaining Nut | 35 N.m | 26 lb ft |
| Washer Solvent Container to Front End Module Support Retaining Bolts | 5 N.m | 44 lb in |
| Washer Solvent Container Filler Neck to Front End Module Bracket Retaining Bolt and Nut | 5 N.m | 44 lb in |
| Washer Solvent Container Filler Neck to Front End Module Bracket Retaining Torx Screw | 4 N.m | 35 lb in |
| Air Inlet Grille Brace to Air Inlet Grille Retaining Torx Screws | 2 N.m | 18 lb in |