FixVault
Home › Pontiac › 2009 › G8 Base › Repair and Diagnosis › External Pages › Different car › Section 25 (Mirror Systems) › Repair Instructions › Power Mirror Switch Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Power Window/Mirror Switch
    GM1939968Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Install the power window/mirror switch (2) by attaching to the retaining clips (3) on the console trim plate (1).
  1. Install the power window/mirror switch (2) to the console trim plate (1).
    2. Fig 2: Identifying Window & Exterior Mirror Switch Electrical Connector
    GM2039754Courtesy of GENERAL MOTORS CORP.
  2. Position the console trim plate (1) over the floor console.
  3. Connect the window and exterior mirror switch electrical connector (3).
  4. Connect the ESP and heated seat switches assembly electrical connector (2).
    5. Fig 3: View Of Console Trim Plate & Floor Console
    GM2042405Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The console trim plate (1) is retained by clips.
  5. Install the console trim plate (1) and push downwards at (A) to engage the retaining clips to the floor console (2).
About FixVault