Power Mirror Replacement

WARNING: This page is about a different car, the 2011 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Power Mirror & Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement . Remove the front side door opening frame garnish molding. Refer to Front Side Door Opening Frame Garnish Molding Replacement .
1	Outside Rearview Mirror Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Procedure Disconnect the mirror electrical connector. Tighten 10 N.m (89 lb in)
2	Outside Rearview Mirror Assembly

Callout

Component Name

Preliminary Procedures

Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
Remove the front side door opening frame garnish molding. Refer to Front Side Door Opening Frame Garnish Molding Replacement .

Outside Rearview Mirror Nut (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Procedure
Disconnect the mirror electrical connector.
Tighten
10 N.m (89 lb in)

Outside Rearview Mirror Assembly