Power Steering Pump Disassembled View
WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | High Pressure Outlet Fitting |
| 2 | Low Pressure Inlet Pipe O-ring |
| 3 | Low Pressure Inlet Pipe |
| 4 | Low Pressure Inlet Pipe to Power Steering Pump Housing Retaining Bolt |
| 5 | Pump Housing Bushes |
| 6 | Thrust Plate O-Ring - Small |
| 7 | Vane, Ten places |
| 8 | Power Steering Pump Ring |
| 9 | Rear End Plate Seal |
| 10 | Rear End Plate |
| 11 | Rear End Plate Attaching Bolt, 4 Places |
| 12 | Full Circumference Retainer Ring |
| 13 | Rotor |
| 14 | Thrust Plate |
| 15 | Thrust Plate O-Ring - Large |
| 16 | Pump Housing |
| 17 | Power Steering Pump Drive Shaft |
| 18 | Droop Flow Control Valve Spring |
| 19 | Droop Flow Control Valve Assembly |
| 20 | High Pressure Outlet Fitting O-Rings |