Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac G8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Splash Shield To Front Subframe Retaining Screws

Courtesy of GENERAL MOTORS CORP.

Install the engine splash shield (2) to the front subframe.

NOTE: Refer to Fastener Notice .

Install the engine splash shield to front subframe retaining screws (1).
Tighten: Tighten the screws to 9 N.m (80 lb in).
Lower the vehicle.