Clutch Specifications
WARNING: This page is about a different variant/trim than selected.
| Component | Description | Specification |
|---|---|---|
| Master Cylinder | Type Bore Size Nominal Stroke |
Compensating Port 19.05 mm 30 mm |
| Clutch Actuating Cylinder | Type Bore size Stroke |
Concentric hydraulic actuating cylinder with side bleed port. Equivalent diameter - 30.6 mm 9.5 mm |
| Clutch fluid | Type | DOT 4 or Super DOT 4 |
| Clutch Driven Plate | Type Outside Diameter Inside Diameter Thickness of disc assembly with 11,000 N load |
Single plate dry disc 297 mm 198 mm 8.8 mm |
| Clutch Pressure Plate | Type Outside Diameter Inside Diameter |
Self-adjusting with pressed steel cover plate and multi-fingered bevelled diaphragm spring. 299 mm 197 mm |
| Clutch Throw-out Bearing | Type Lubrication |
Ball Race. Sealed with grease for life. |
| Actuating cylinder guide sleeve | Lubricant | NLGI No 2 lithium soap based EP grease with molybdenum disulphide, such as sheel Retinax HDX2 grease, BP Energrease LMS-EP23 or equivalent. |