FixVault
Home › Pontiac › 2009 › Solstice Base, 2D Convertible, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying CKP Sensor Electrical Connector
    GM1589842Courtesy of GENERAL MOTORS CORP.
  1. Remove the starter. Refer to Starter Replacement .
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (1).
    3. Fig 2: View Of CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault