Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
- Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
- Always route the replacement cable the same way as the original cable.
- Remove the battery box. Refer to Battery Box Replacement .
- Disconnect the battery cable retainers (1) from the battery tray.
- Remove the negative battery cable nut (2) and cable (1) from the inner fender body ground stud.
- Remove the negative battery cable nut and cable (1) from the transaxle stud.
- Remove the negative battery cable from the wire loom.