Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Torrent and 2008 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Brake Fluid Level Sensor

Courtesy of GENERAL MOTORS CORP.

While noting the proper orientation, install the brake fluid level indicator switch to the master cylinder.
Press the brake fluid level indicator switch firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.

Fig 2: View Of Brake Fluid Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the brake fluid level indicator switch electrical connector.
Install the underhood electrical center bracket. Refer to Underhood Electrical Center or Junction Block Bracket Replacement .